Description:

Quick Details

Packaging & Delivery

Specifications

T5 Fluorescent lamp emergency conversion kit
1auto-test
2CE&RoHS cer
3OEM order available
4 T5 Fluorescent lamp

T5 Fluorescent lamp emergency conversion kit

OVERVIEW

Malon emergency light, adopted high efficiency T5/T8 fluorescent tube, specialized in low consumption, long life span and high efficiency of electrical -to-optical converting.The device, instantly alternating operatation status on power interruption, conflagration, earthquake, indicating precise emergency exit direction, is applicable to hotel, restaurant, shopping mall and tall building etc.

This series of product could be used as normal lighting in general; While the AC shutted down, the emergency lighting activates instantly no matter how the status of the switch.

Key Figure

NOMINAL VOLTAGE AC220~230V50/60Hz

CHARGE PERIOD ≤ 24 hours

LAMP T5-28W

DURATION ≥ 90 mins

RATED LUMEN OUTPUT T5-35W 260Lm T5-28W 100Lm

IDEAL TEMPERATURE -5°C ~ +45°C

BATTERY Ni-Cd 6V 2.5A h

SPECIFICATION

Primary power indication while AC input, red LED is on; on the contrary, red LED turns off.

Discharge protection power discharge to 80% of the nominal voltage, discharge circuit would cut off autonomously to saveguard the life-span of battery.

Illuminant this series of product adopts fluorescent light for illuminate, providing high-degree brightness and energy saving.

METHOD OF APPLICATION

Installation and inspection

1. Placement the device as necessary and fix it firmly.

2. Wiring accurately refers to the connection diagram.

3. Being inputted AC, the device runs primary power status, pressing the trial buttom to test whether or not emergency module is operated. While released the trial buttom, the device resumes general status.

Method of installation

There are nail-fixed holes on the backside of lighting device. Peg 5cm nails onto wall or proper places with the same distance as the nail-fixed holes. Hang the device onto the nails for 10mm, to ensure the device fixed stably.

Method of battery replacement

1. Cut the AC off, remove the reflected light cover(board).

2. Extract battery plug from both side

3. Unscrew the fixing battery and extract the battery gently.

4. Replacement a bran-new battery.

5. Reverse the order above to assemble the device

Note

1. Please replace the battery on the proper direction. Reversal assembling might cause damage such as burning, explosion and fire etc.

2. Please dispose the worn-out battery properly without contamination.

Method of illuminant replacement

1. Cut the AC off.

2. Remove the reflected light cover(board).

3. Extract the faulted fluorescent light(tube)

4. Replace the same model luminant

5. Reverse the order above to assemble the device

Maintenance

In order to apply the device efficiently and save, regular cleansing and inspection would be recommanded. Please wiping the device by soapsuds soaked cotton-cloth and drying it thoroughly. Be attention not to use tiana water or gasoline or any fierce chemical while cleansing, otherwise, the components and parts might be damaged. Please keep the device away from rain water or any humidity circumstance.

Method of wiring

Read the wiring diagram on the wiring concentrator of the light body for detail information.

Caution

1. For proper usage, please read this manual carefull before charging on AC.

2. The main power of the emergency light should be pluged into individual switch rather than with the same switch for general light or electrical equipment.

3. For illuminant replacement, the substitution must be with the same specification parameter. Since the device plugged into AC220V, power interruption should be primary prior to guarantee safety.

4. The device adopts evacuated Ni-HM battery pack, please charge for 24 hours before application. The initial duration might be insufficient by prolonged unocupation, please charge/discharge for 3 times thoroughly (charge for 18 hours and discharge until the battery empty), then the battery would be recovered.

5. For fuse replacement, the substitution must be with the same specification parameter (Read the nominal parameter on circuit board). Since the device plugged into AC220V, power interruption should be primary prior to guarantee safety.

6. After application, please immediately plug into AC220V and charge for 24 hours. Prolonged unoccupation might affect the battery life-span, we suggest to charge/discharge every 3 months minimum. Charge/discharge every 6 months in general application. Replace the battery while discharging period is 50% less than the nominal regulation. For detail information on battery, please contact with the manufacture.

7. On application, device must be ground connected by grounding sign.

Update Date:2011-5-31 0:20:28