Description:

Quick Details

Packaging & Delivery

Specifications

CDMA: 869-894
GSM: 925-960
DCS/PHS: 1805-1920
TD-SCDMA: 2010-2025(TD)
full power of 4500mAh

Mobile Phone Signal Isolator 

Thank you for choosing our company's high-power hand-held mobile phone signal isolater .

The mobile phone signal isolater is the information security products independent developed with full knowledge by our researchers who analyzed communication mechanism deeply and integrated electromagnetic emission suppression method. It can lost mobile phone signal within your charge area when you need, effectively prevent many hazards lead by mobile phone imformation leakage.

Mobile phone signal isolater will provide you a quiet space, it will become a credible and faithful defender.

1. Use

This mobile phone signal isolater works effectively for mobile phone communications, no interference with other electronic equipment, harmless to people. It can be widely used in the places that need long-distance mobile phone shielding, such as government, court, military, jail, police station and command centre.

2.Features

2.1 Small size for easy carrying, independent control of each band.

2.2 All composed by SMD and high-density integrated circuits, advanced performance and stable work for long hours.

2.3 The host production process strictly follow ISO900 Quality System, stable and reliable, is the ideal product to enhance information security.

3. Main function

3.1 5 channel effective shielding: CDMA, GSM, DCS, PHS, TD-SCDMA, 3G(CDMA2000/WCDMA).

3.2 Shielding mobile phone signals only do not affect the normal operation of other electronic devices.

3.3 Used outside at least 2 00 meters from the base station (straight-line distance).

3.4 Soft-start circuit control, the design of electronic switch can reduce the damage to the major device that produced at the moment the power switched on.

4. Main Specifications

4.1 Effective shielding diameter is between 1-15 meters depending on field signal strength of base station.

4.2 The width of the main band:

CDMA: 869-894

GSM: 925-960

DCS/PHS: 1805-1920

TD-SCDMA: 2010-2025(TD)

3G: 2110-2170(Telecom and China Unicom)

4.3 Working Hours: full power of 4500mAh high-capacity lithium battery can work stable and continuously for 2 hours.

4.4 Ambient temperature: -45°C-+95°C

4.5 Relative humidity: 30%-95%

4.6 Power adapter: input AC160V-240V   output DC 5V 3A

5. Installation steps

5.1 Remove the shielding host from the box.

5.2 Screw each antenna into the corresponding antanna base, or may fail to shield.

5.3 Introduction of panel operation (in the open state you press a button each time, blue status indicator flashes).

5.3.1 panel

5.3.2 upper and lower side

6. Operations guide

6.1 On/Off key

  Off state press the key for 3 seconds to start. Press each time change the port’s switch state each time,

doesn’t change the state of flashlight. Open state press the key for 3 seconds to close.

6.2 Press power button for 3 seconds to start the isolater, panel display shows green, the blue LED of corresponding band light.

6.3 Press the band switch can open or close the corresponding band in open state.

6.4 Press the flashlight switch can open or close the flashlight in open state.

6.5 Status indicator truns red showing low power, please charge. It takes about 6 hours to full charge the battery.

9. Packing list

     Host mobile phone signal isolater        1 set

    Charger                                     1 entries

    Antenna                                    1 set

    Instruction book                        1 piece