Description:

Quick Details

Packaging & Delivery

Specifications

We are leading manufacturer of Instrumentation Valve, check valve, gauge valve, control valve, instrument valve.in india.

Established in 1974, Fluid Controls is an ISO 9001 certified company with certificate no. 00241-2003-AQ-DNV-RvA dated 27.3.2000 from Det Norske Veritas. The company is involved in the manufacture of Double Ferrule Compression Tube Fittings, Valves, Manifolds and specialized accessories for use in instrumentation, hydraulics, pneumatics, and lubrication. The company has a wide range of products for the Oil and Gas Industries, Petrochemicals, Rotating Machinery, Power Generation, Cryogenic and Vacuum Applications among others.
At Fluid Controls, we draw our strength from over twenty-nine years of our experience in the design, engineering, manufacturing and supply of a range of high performance valves and manifolds. These precision products are used for instrumentation in the chemical, petrochemical, and oil and gas industries, as well as for high pressure hydraulics, pneumatics and lubrication.

DESIGN AND MATERIALS
Engineered to specific designs for low, medium and high pressure usage, the valves and manifolds manufactured by Fluid Controls are available in a wide range of materials. These materials are custom-selected for the body, trim and seals to suit the pressures temperatures and fluids used in the pressure lines.

The materials used for manufacturing are based on ASTM/DIN/BS and Indian Standards, depending upon the requirements of our customers. Most of the products manufactured are in carbon steel (ASTM A105) and stainless steel (ASTM A182 F316, ASTM A 479, and ASTM A276 in the SS range). Both the materials conform to NACE MR 01-75 for specified corrosive applications.
Special valves are also available in materials such as high tensile Brass, Nickel, Aluminium, Bronze, Monel, hastealloy C, Titanium, PTFE depending on the specifications of the applications they are required for. Some examples of applications and the materials used are :
• Monel is widely used in oil and gas applications, specifically, for sour gas service where a high concentration of sulphur is found.

• ASTM A182 SS 316 and 316L conforming to NACE MR 01 75 are used where concentrations of sulphur are lower.

• PTFE valves are required for chlor-alkali applications


For all the valves displayed in the catalogue, the full range of materials for body and trim are available.
The Company also manufactures valves for the naval and sea service that are designed for high pressure pneumatic applications. These valves are available in Nickel, Aluminium, Bronze, SS 316 Ti and SS 321.
The gland seal material for the valves depends on the applications and the temperatures of usage. Standard gland seals are available in PTFE. For high temperature graphitized asbestos and graphoil for temperatures above 1800C and 2700C respectively. For high temperature applications above 1800C and 2700C graphitized asbestos + graphoil are used respectively. Much of the manufacture in Carbon Steel is to ASTM A 105 and in Stainless Steel to ASTM A182, ASTM A 479 and ASTM A 276 respectively.
MANUFACTURE
Fluid Controls products are manufactured using ultra-modern facilities. All designs are first tested and tried in the development section before they go in for general manufacture. The products are also machined for tolerance and compliance with International Standards. For special applications in cryogenic and ultra-high pressure service, the clients first test the products and then place orders for usage.


QUALITY CONTROL
At Fluid Controls, we are committed to ensure that the requirements of our customers are fully met with respect to quality. Consequently, all our products undergo rigorous quality control. We have a full-fledged Quality Control department that is equipped with all required gauges and test equipment. In case of any special tests for which we do not have the facilities, we are backed by the support of nationally recognized laboratories.

For each of our valves, we have developed separate Quality Assurance Programs that are submitted to clients who place large orders. This is a routine feature for all project orders supplied by Fluid Controls, and is a key to the reputation we have acquired over the past twenty-five years.
CERTIFICATION
All valves supplied by Fluid Controls come with ISO 31.b Certificate for material, performance to regular and type tests specified by our customers.
PRODUCT RANGE
Given below are the products manufactured by us at Fluid Controls, which are featured in this catalogue.

A. Needle Valves
We have a comprehensive range of Needle Valves (refer page 1 to 15 ). These valves are available in the following designs : two-way, three-way, multiport, single block and bleed, double block and bleed. These Needle Valves are available with a variety of end connections covering screwed male/female pipe ends which conform to both single ferrule and double ferrule designs.

The Needle Valves manufactured by us have a unique feature : a swivelling, non-rotating plug and thread above the gland seal which ensures that the threads are not left wet by the fluid media. This feature contains the pressure within the envelope below the gland seal to prevent body-leakage, thereby ensuring a long life. The swivelling plug tip also ensures positive aligned seating for repeat operations. The plugs of our SS valves are hardened by a unique process, which prevents indentation of the plug and guarantees long life for each valve that we manufacture.

We are a reputed manufacturer of Needle Valves and have the capability to accommodate the requirements of our customers with any end connections and requirements especially those required for high / medium / low pressure applications as well as for high / medium / low vacuum applications. We also manufacture valves with a variety of seals to suit high to low temperature cryogenic applications.

Given the diversity of our products, the Needle Valves displayed in the catalogue do not cover our entire product range line. Please do not hesitate to contact us for valves of special applications or for those with minor variations. We will be glad to heed to your request.

B. Ball Valves
Fluid Controls Ball Valves were originally designed for use in hydraulic applications. Their applications, however, also extend to instrumentation, pneumatics, hydraulics and other fields. Our Ball Valves are available with a wide variety of end connections (screwed ends, single ferrule ends, double ferrule tube ends) and in a range of two, three and four-way designs.

Fluid Controls Instrumentation Ball Valves for switching service are suitable for panel mounting. They are widely used in two-way as well three and four-way designs with bottom entry and other outlet ports in the same plane. Their compact nature is ideal for applications that require minimum carry-over fluid when switching from one port to the other. These Ball Valves are also used for CNG applications, for static and vehicular installations.

In the field of hydraulics, the Ball Valves we manufacture are available with flanged ends for sizes 1.5" and above, which conform to SAE and CETOP standards. The Fluid Controls Ball Valves shown in the catalogue (refer pages 34to47) are specifically designed for isolation where the pipes carry SAE and CETOP flange connections with butt weld or socket weld ends.