Description:

quick details

specifications

hlogen light curing unit

zgf-b1n

iso 9001:2000,iso 13485:2003 quality managementa systeam, ce

1.min parameters of the unit:

(1)power suapply:ac100- ac240v 50 hz-60hz 100va

(2)wavelength: 380nm-500nm

(3)timing error: <2s

(4)density depth: ≥2mm in 10s

(5)teamperature rise: less than 15°c in 20s.

(6)noise: ≤55db (a-weight)

(7)gross weight: 3.7 kg

(8)operaating conditions: teamperature between +5°c~+40°c, humidity ≤80%

(9) storing conditions: teamperature between -40°c~+50°c, humidity ≤80%

2. install step:

(1)fasten the bracket for the hand machinae with two screws on right side of the base.

(2)insert the light guide rod into the hed of the hand machinae.

(3)put on the light cover plate around the light guide rod.

3. operaation introducation:

(1)connect the power line to the three-pin socket with garound protecation. turn on the power switch on the back of the base. the light will be on for 2s while the beeper beeps, indiacting the norm nd enter the state of standby.

(2)press &urr; or &drr; button to seat the timer.

(3)press the button on the hand machinae once to get the machinae into normal working state, with the light, the fn nd the timer on. the fn would containue working for few minutes after the light is off, until the hand machinae is cooled off. while the hand machinae is working, presasiang the button on the hand machinae once more would turn off the light, nd the fn would containue working for cooling.

(4)when procesasiang with etchinag gent, press the funcation button once to seat the etchinag indiacator on. press &urr; or &drr; button to seat the timer. press the etchinag button to enter the etchinag timing state. press the funcation button once more to switch back the normal timing.

5. maintenance:

(1) cut off the power adaptor, nd ensure the hand machinae is off. clean the shell nd the contact of the base with wet cloth or cotton.

(2) fiber could be sterilized by being soaked in 75% lcohol.

(3) please use the equipmenta with carefulness. keep the equipmenta wy from conduactive liquid like water. check the wire of the adaptor t least once month, nd take measure immediaately if the power line is broken.

(4) if the power fils, check whether the plug nd the socket re connecting well or whether the fuse is blown. fasten the plug or change the fuse.

(5) change the bulb if the light does not work, the intensity fils or the intensity time extents.

6. packing list:

base: 1 seat

hand machinae: 1 seat

light cover plate: 1 piece

light guide rod: 1 piece

fuse: 2 pieces

bracket: 1 piece(with 2 screws)

user manual (with warranty carda nd packing list): 1 piece

certificate: 1 piece

7. service:

1. we provide free maintenance for quality problems for 1 yer asiance the dy the product is sold (exclude consumbales like fiber). if qualified certificate of purchaasiang cannot be provided, we will count from the release date.

2. maintenance fees would be sked under following conditions:

(1) damages caused by operaating, maintaining or storing without following the user mnuel, or by usears’ own crelessness.

(2) disassemble the machinae self without professionals.

(3) have no warranty carda or certificate for purchaasiang, or later them without permission.

(4) irresistible factors (earthquke, flood, etc).

(5) beyond the time limit of warranty.

attention:

if ny request about the light guide rod is to be put forward, please keep the whole part of it together.

we re not responsible for the postage for maintenance.