Description:

Quick Details

Packaging & Delivery

Specifications

Can-bus HID Ballast
Waterproof,dustproof,anti-vibration,with philips chip,high quality
12v/35w,almost for all cars(>90%)

HID Ballast

12V /35WSpecification and Test Item

Can-bus Ballast (best quality)

Colorsilver

2.Recoder is available

3.HID running parameter

Input voltage 9--16V DC

V norm13.5V

Maximum starting current 5.5A

Rated current 3.5A

T CASE -40 -+105

Constant power output 35W

Startup characteristics 1 second to reach 20% brightness,6 seconds to the rated brightness, 20 seconds to a stable current.

Over-voltage protection when the working voltage wasbigger than 32V, the product enteredinto self-protection state

Low voltage protection when the working voltage wasless than 9V, the product will enteredinto self-protection state

Short-circuit protection When the lamp output line was short-circuit, the product enteredinto self-protection state

Output open-circuit protection When the lighting tube ruptured, the product enterdinto self-protection state

Reverse Protection When the power wasnegative reversed, product wouldn’t work,Protecting current =0.00A.

4.HID check porojects

Appearance :smooth surface without scratches, no deformation, damage,
no broken links, non-deformation.Plug connection should be firm, not to loose.

Insulation test:The insulation resistance of shell ≥ 100MΩ.

Open-circuit test:output open, connected to 13.5V DC, high-voltage discharge output stop at 1-2 seconds,the product enterEDinto automatic protection state.

Short-circuit test:output at short circuit state, connected to 13.5V DC, after 0.5-1 second,product enteredinto automatic protection state.

Working current:connectedto 13.5V DC, cold start-up current ≤4.0A, stable current :3.2±0.1A.

Hot start test:Continuous start up to 5 times after stable work for 5 minutes

barrier-free,hot starting current:equal or less than3.2A.

Reverse test:connectedto 13.5V DC reversely, the product wouldn’twork.

Overvoltage protection:When the voltage reach 33-40V, product enteredinto automatic protection state.

Loss test:lighting tube power stayedat 35±2W, the loss of the ballast should be 6±2W.

Surface temperature test:connectedballast with xenon lamp,light for an hour at room temperature, the ballast surface temperature should not exceed 105°C.

Waterproofperformance:immerse the ballast in 100cm water at nomal temperature for half an hour, the ballast couldstill work.

High and low temperature performance:the ballast couldwork at temperature -40°C-- +105°C.