Quick Details

Packaging & Delivery

Specifications

Universal laptop adapter for car & home
Automatic voltage management
LED srceen
USB output
8 or12 tips fit for most laptop

This is a multi-function power adapter, which includes the AC-DC; DC-DC; plus USB 5V, 90 watts for a single set of constant DC output voltage source. Wearing LED display, display AC or car DC with use, display the output using the voltage, especially with adapter 15V-20V common notebook interface adapter. Output voltage Rated current Rated power output voltage ripple & noise output current range of Connector Size Fit for laptops

Electrical Characteristics: (AC-DC)


First, the input conditions (AC ~).
1. Rated voltage 100-240Vac.
2. Adjustment range 90-265Vac.

II. Input Frequency
1. To adjust the frequency 47 - 63Hz.

III. Input current (full load connected)
1. When the input AC voltage when the current 1.3-1.7A 100Vac
2. When the input AC voltage when the current 0.6-0.9A 240Vac

IV. Inrush current
1. When the output of the rated load, the ambient temperature is 25 °C, the input 220Vac cold from the machine is less than the maximum surge current is 50A.

Five. Hold Time
1. 110Vac 50/60Hz input and output maximum load, the output of the minimum hold time is 7ms.

VI. No-load input power
1. 100Vac input voltage conditions, the pin input power is less than 2.0 W.
2. 240Vac input voltage conditions, the pin is less than 4.0 W input power
Efficiency
3. 115/230vac when the input voltage range, the DC output current and voltage drop for a minimum of 82% of efficiency.

VII. Safety Test
1. When the output voltage is 240Vac 50Hz frequency, the leakage current less than 0.25mA.
2. High-pressure test: primary to secondary is greater than 1000V ac, 10mA / 60 sec.
3. Insulation: primary to secondary circuits, DC 500V Time / sec Insulation Resistance ≥ 10MΩ. Ripple requirements
Test conditions: with normal work load, using 20MHz bandwidth oscilloscope connected to the power board output, while output and connected to a 10uF electrolytic capacitor and a 0.1uF ceramic capacitor, test ripple <150mVpp

Electrical Properties of Power

One. Over-current protection
1. Rated at 8A-9A.

II. Protection
1. Short-circuit protection with auto recovery.

III. Rise time
1. 230Vac input and output maximum load, the output voltage from 100% to 90% of the rise time is less than 20ms
Electrical Characteristics: (DC-DC)

Power of the electrical properties

One. Input conditions (DC).
1. DC10.0-15.0V input voltage power supply current 7-9A, the output voltage of 15.0-20VDC, Output Current 6.0 (Max).
2. Power supply: power supply voltage from 10V/DC to 15V/DC.
Minimum Typical Maximum
Input Voltage (Vac) 10V/DC 12V/DC 15V/DC
Input Current (A) 9A 8A 7A


II. Work environment
1. Temperature: 0 °C ~ +40 °C
2. Humidity: 10% - 90%
3. Atmospheric pressure: 70kPa ~ 106kPa
4. Case temperature: 25 °C ambient temperature of the power in the continuous work, the shell temperature does not exceed 65 °C

III. Inrush current
1. When the output of the rated load, the ambient temperature is 25 °C, the input 12V/DC cold from the machine is less than the maximum surge current is 50A.
2. Rated current input: less than 15A (Max)

IV. Input power
1. No-load:greater than or equal to 0.2W;
2. Maximum load:greater than or equal to 90W.

VI. Work environment
1. Temperature: 0 °C ~ +45 °C
2. Humidity: 10% - 90%
3. Atmospheric pressure: 70kPa ~ 106kPa
4. Height; from sea level to 10,000 feet (operating) and 40,000 feet (non-running).

VII. Input Wire Size
DC input 5.4/2C (0.16 * 26) without the word line of cars filling line 1000MM
DC output cord SPT-1, multi-function cable 1000mm, UL2464 18 #

VIII. Short circuit
1. DC input, do not short-circuit, short circuit fuse protection; thread from the new replacement car charger can work within the fuse




Composite Index

First, lifetime

a. The average life expectancy of 5 years. 8 (H) × 300 (D) × 5 (Y).
b. 25 °C ambient temperature

Second, M.T.B.F.
a temperature of 25 °C, the power supply MTBF is 50,000 hours.

Third, the temperature rise
a in the ambient temperature 25 + / -1 °C, the plastic shell of the rated output current and load current output is less than 45 °C.

Fourth, the aging test
Product ratings, with a rated load of 80 to 100% of the aging temperature is 35 ~ 45 °C, 4 hours aging products tested by one hundred percent. Ensure that work.

V. Vibration
a. Non-vibration case, if a 7-50Hz, with 2G'S peak, when the 50-500Hz, with a 4G'S peak, after testing
No exceptions occur.
b. after operating vibration 0.5G 'S peak

VII. Look and feel requirements
a. power supply should be no scratch the surface, flow marks, burrs, cracks, no sink marks, drag and flowers forming defects and other mechanical damage;
b. a clear model and safety certification mark;
c. shaking power, should not shake a sense of internal power;
d. connecting the surface without cracking, high-pressure part of the access to electricity, the non-exposed live metal.

VIII. Drop test
a. No packaging placed on the level of support for the power board, so that power from falling into the 20mm thick 1000mm high wooden platform on each side of the secondary, the most unfavorable direction of the second test. After the test, the power pins without shaking, the internal structure should be no loose, damaged, skin should be no damage, the normal charge, the electrical performance testing in the specifications.