Quick Details

Packaging & Delivery

Specifications

air sausage gun
Cartridge: one-component
Capacity:310ml
Material: plastic body
Color:red,any color available

air sausage gun

Item no.: CGA-310

Cartridge: one-component

Capacity: 310ml

Material: Plastic Body

Weight: 0.2kg / piece

Package:10pcs / carton

Inner packing: 75mm×58mm×65mm

Outer packing: 290mm×395mm×345mm

Scope of application(tools):

1. general glass assemble,such as glass,window,and door
2. sealing,repairing and bonding the joint of other construction materials,such as aluminum,tile,some plastic and wood
3. other building or industry

Suggested Use Materials:

--Epoxies, Acrylics, Silicones, Polyesters.

--Epoxy Acrylates, Hybrids, Urethanes.

--Polysulfides, foams, Polymers, polyureas

Operating Instructions:

Load Sealant Pack:

1. Piston Operated Cartridge Applicator

Remove the front cap.

Pierce or cut off the neck of the cartridge and screw on the nozzle

Using the cartridge, push the plunger down the barrel until it will go no further.

Tightly replace the front cap.

1. Sachet Applicator

l Ensure the desired nozzle is fitted to the front cap.

l Using a new sachet, push the floating plunger down the barrel until it will go no further.

l Cleanly cut off the end of the sachet or crimped clip where present.

l Tightly replace the front cap.

Operation of the trigger:

By pulling the trigger, a cushion of compressed air builds up inside the applicator to initiate the flow of sealant. On releasing the trigger, the sealant flow ceases as the compressed air escapes rapidly by a silenced quick exhaust valve at the rear of the gun..

Caution:

1. Always disconnect the air line prior to dismantling the applicator.
2. To ensure trouble-free operation of the applicator, it should be wiped clean of all sealant residue after use with the sealant manufacturers recommended solvent.
3. Front caps should always be secured tightly during use.
4. It is recommended that safety spectacles are worn when using all pneumatic tools.